Renke ABS Tipping Bucket Rain Gauge

Product Description

The tipping bucket of our rain gauge is equipped with constant magnetic steel, and the reed switch bracket is equipped with a reed switch. When the equipment leaves the factory, the magnetic steel, and the reed switch have been adjusted at a suitable coupling distance so that the output signal of the instrument and the number of flipping buckets can be determined.

Product Features

Our tipping bucket rainfall gauge is composed of an integrated shell, filter, funnel, reverse flow dumper, terminal block, leg bracket, reed switch, control box, rain gauge base, etc. Among them, a tipping bucket shaft, around the horizontal bubble, a dry reed switch bracket, and a signal output terminal are installed on the rain gauge base. Unlike other tipping bucket rain gauges, the tipping bucket sleeve of our rain gauge is an integrated positioning structure, and the tipping bucket is installed in the shaft bearing through the tipping bucket shaft. The internal structure of our rain gauge has been assembled before leaving the factory, and there is no need for on-site installation of the internal structure, which brings convenience to on-site installation.

Parameters

Inner diameter: Φ200mm/8 inch
Resolution: 0.2mm
The acute angle of cutting edge: 40°～45°
Operating Temperature: 0～50°C
Working humidity: <95%(40°C)
Measuring range: 0mm～4mm/min
Accuracy: ±7%
Power supply: 10V～30V DC
Output signal: RS485/Pulse
Mounting holes: Three mountings