Renke Tilt Sensor & Inclinometer

Product Description

This tilt sensor is an instrument used to measure the multi-axis tilt of a reference plane. The inclinometer converts the change of the tilt angle by measuring the static gravitational acceleration, so as to measure the tilt rate and angle of the sensor relative to the horizontal plane. It can easily detect orientation or tilt. It is widely used in industrial inclination measurement and dangerous building monitoring, ancient building protection monitoring, bridge tower inclination measurement, tunnel monitoring, dam monitoring, weighing system inclination compensation, drilling inclination control and other industries. Beautiful appearance and easy installation.

Product Features

• Using the Kalman filter algorithm, the accuracy is up to 0.05°
  
• It has a wide-angle measurement range and good output signal linearity, which can be used in most environments.
  
• Dual-axis inclinometer for horizontal and vertical mounting
  
• The overall housing of the tilt sensor is waterproof and corrosion-resistant. Design appearance suitable for harsh environments
  
• Various technologies including MEMS, fluid-based, and potentiometer designs
  
• Free cloud platform for data view.

Parameters

Power: DC 5-30V
Range: X, Z: -180°~180°, Y: -90°~90°
Resolution: 0.01°
Accuracy: X, Y axis: static accuracy ±0.1°, dynamic accuracy ±0.5°, Z axis: static accuracy ±0.5°
Protection: IP65
Cable: 60cm, can be customized
Output: RS485

Installation Instruction

Please install the inclinometer according to the correct installation method. Improper installation will cause measurement errors.
The installation surface of the tilt sensor and the surface to be measured must be fixed tightly and flat. If the installation surface is uneven, it will easily cause the measurement angle error of the transmitter.
The axis of the sensor and the axis to be measured must be parallel, and the two axes should not create an angle as much as possible.