Renke Industrial Water Leak Detector

Product Description

It is used alternating current to collect the inductance parameters of stagnant water to accurately distinguish whether water is immersed, and can even distinguish between pure water and tap water (the tap water is the default detection object, if you want to detect pure water, please give special instructions). Because of the use of alternating current detection, the electrode will not produce electrophoretic polarization even if it is immersed for a long time. It does not rely on special electrodes to achieve long life and reliable detection. 

In addition to this industrial water leak detector, we also have a positioning water leak detector that can display the location of the water leak in real-time when it detects a water leak.

Parameters

Power supply: DC10-30V
Max. power consumption:  Relay output: 1.2W
                                                 RS485 output: 0.4W
Detection object: Tap water, purified water
Operating temperature: -20~+60, 0%RH~80%RH
Output signal: Relay output: Normally open contact
                           RS485 output: Modbus-RTU protocol

Water leak detector wiring

1. Power supply and 485 signal wiring

Wide-voltage power input can be 10~30V. When wiring the 485 signal line, pay attention to the two wires A and B not being reversed, and the addresses of multiple devices on the bus cannot conflict.

2. Relay interface wiring

The standard equipment is equipped with 1 relay output, and the two outgoing wires are normally open contacts.

3. Use of leaking rope

Customers who buy our line-type water leakage sensor, please pay attention when connecting the leaking rope. The black line is the water leakage sensor line, and the yellow line is the support frame. The black sensor lines at both ends of the leaking rope should not touch each other.